Why won't my window air conditioner cool my bedroom? - sunbeam air conditioner
I have two different A / C in my room cool (I never had air conditioning before, so I do not know how) or have seemed to work well!
Our room is 10 "x 13" with a stain on the wall under the window, so that we can put an air conditioner. Our ceiling is the height (I'm sure that 8 feet).
Firstly, a Sunbeam 6000 BTU. The parents of my friend said he was working at home. We here at the candle and began to cool (not freezing blow air), then a little colder, and then cool. We just plugged in for hours, perhaps 1 or 2 at a time, but never cooled the room.
Second, we now have a person who worked at home. He is a 5050 BTU Goldstar. It was blowing cold air. Then it was a little more heat and cold, etc. We have been here in 2 hours and now our bedroom is not cool to.
Maybe we are not patient enough.
We have black curtains for our room is dark. And be open with no windows or doors. Please help! Thank you! : D
Thursday, January 14, 2010
Sunbeam Air Conditioner Why Won't My Window Air Conditioner Cool My Bedroom?
Subscribe to:
Post Comments (Atom)
5 comments:
The windows have a tendency to dirt and lint buildup on the inside of the part (opposite the fan) of the capacitor. This can be done in one summer, in some areas. This reduces the efficiency of the plant by almost 50% because you are not from the heat transfer. If you use the units, there is a problem that could make both. Most devices are discarded, only to have this collection, and afterwards to work properly.
On the back of the unit (the part that is off), they want to inspect the other side fins. To this end, a flashlight blinds on the side, and illuminate the area around the fan blades. It should not go outside. It is likely to see some buildings. If the area is locked, you can smear carefully before using a garden hose, through a movement from top to bottom only, so as not to damage the fins on the outer. These fins are also flattened the poor cooling, so if you have a lot of damage, gently with a blunt object to straighten out. Respray re-examine and, if necessaryssary into the fins.
Many units have to be properly cleaned and dismantled, but the pipe is to create an adequate amount for most new work units.
if the CA is moving a lot before it can against the wall, the coolant are solved in a few hours before it starts to work properly.
Also, make sure that the filter is clean.
Only for a while off, let things (and the time of two hours), then turn it on and wait (patience, lol) ... Sleep must be cooled before tonight.
:) Hope this helps.
if the CA is moving a lot before it can against the wall, the coolant are solved in a few hours before it starts to work properly.
Also, make sure that the filter is clean.
Only for a while off, let things (and the time of two hours), then turn it on and wait (patience, lol) ... Sleep must be cooled before tonight.
:) Hope this helps.
Get a thermometer and put it in the air blowing out.If indicates 50 has' a problem.If then made sure that the thermostat above 5 (If the compressor is low, to return too soon)
Get a thermometer and put it in the air blowing out.If indicates 50 has' a problem.If then made sure that the thermostat above 5 (If the compressor is low, to return too soon)
Post a Comment